Epson Printer Error Code 0x97
How to Fix Epson Printer Error Code 0x97?
Epson Printer Error Code 0x97 warning if the problem is related to internal hardware it caused by motherboard failure or other interior parts as well it might be printer to turn off or stop printing and hardware failure needs a quick fix or replacement. To Fix Epson Error Code 0x97, contact with Errorssupport read the easy steps are given below.
Hardware failure always happens without warning, however; you can try the following steps to fix the issue:
Steps to Fix Epson Printer Error Code 0x97
Method 1:
1. When this kind of error message appears on screen kindly, switch off the power.
2. And unplug all connected cables from the device.
3. Also, unplug USB drivers as well.
4. And remove the all printer cartridges from your printer.
5. Plug again all cables and USB and reinstall printer cartridges once again and turn on the power.
6. If the error code still remains so, continue with the next method.
Method 2:
Turn off your Epson printer and unplug again.
1. Kindly disconnect the all cables and USB once gain.
2. Wait for the 5 to 7 minutes until the printer cools down.
3. Press and hold the power button for 40 to 60 seconds and kindly, do not release or leave.
4. After 40 to 60 seconds, plug from the power cord and hold for another 50 or 60 seconds.
5. Leave the power button once again and check if error message still shows.
Also, you can try Clean Mechanic Pad procedure to fix the issue. Switch off your printer and unplug from the cords also removes printer cover.
1. Wet tissue with warm water. Wipe cleaning cushion.
2. Leave wet tissue for a couple of minutes on the cushion.
3. Remove the tissue and abandon it to dry totally.
4. Plug in and turn on the printer. Check whether mistake holds on.
For more detail you can visit our website Epson Printer Error Code ox97
Comments
Post a Comment